Home > Gun Parts >

Mossberg 930 Tactical Rail

Black Aces Tactical Quad Rail for Mossberg 930


 
Alternative Views:


Price: $144.99

Stock Status: Ready to Ship

Product Code: RB7930
Qty:

Description Additional Information
 
So far as we can tell, this is the first manufactured Mossberg 930 quad rail produced [and what a great piece]! This Mossberg rail is the last word in quality accessorizing.

Prepare to be blown away, because this is the real deal. This Mossberg 930-compatible rail is beautiful and entirely functional. This work of art now allows any picatinny rail accessory, such as those on your rifle, to be mounted on the Mossberg 930. Take your shotgun to the next level!

No gunsmitthing required! This rail will fit both tapped and untapped receivers. Installation takes under 10-minutes from the time the rail is removed from the box to the time the shotgun is ready to fire. We even supply the tools and instructions!

Compatible with 12ga models!

Compatible with extended magazine tubes only.

OEM heat shields should be removed as this rail replaces them. The manufacturer recommends a minimum barrel length of 18-inches. The clamp supplied with this rail is not compatible with models featuring a breach muzzle or flash hider/supressor-style muzzle.

Manufactured by Black Aces Tactical. Proudly Made in America.

*Firearm and accessories pictured are not included.

***NOTE: The clamp system in this kit sees 100% of the shock associated with every round fired. It is of the utmost importance that the clamp be as tight as possible so as not to move backwards. Loctite and frequent checking of the clamps is recommended. If the clamp works loose, all of the energy is transferred to the pins and screws, which are not meant to see that level of shock.***
Features
  • One piece T6 6061 construction
  • Ultra-light 14 ounce weight!!
  • Type 2 black anodizing
  • Full install kit with tools
  • Expect recoil to be cut by 15%
  • Serial number remains visible! In many states it's a crime to obscure the serial number of any firearm, and our rails do not obscure the serial numbers whatsoever!
  • Made in America

Average Customer Review: 4.5 of 5 Total Reviews: 18 Write a review.

  0 of 0 people found the following review helpful:
 
Awesome setup and looks great. April 24, 2016
Reviewer: Someone out there from WI United States  
Remove the factory rail before you begin. Requires removal of new system entirely each time you wish to clean anything other than the barrel. Terrible instructions watch the youtube video. Do not tighten the 4 screws near trigger assembly more than necessary or you will interrupt the cycling of the gun.
 Use a soft cloth/sock during install to minimize scratching. I am completely happy with this purchase and it looks awesome.

The four small screws and spacers attach near the trigger. Two longer screws go with the rail mount into the holes that are beveled, one on each side. The larger of the two rings of the rail mount goes over the extension tube.  The smaller of the two screws go into the rail mount, one on each side, where you are able to use the holes in the rail after lining up the rail mount once on the barrel.

Total install ~25 mins. It does add some weight to the gun but worth the ability to customize. It looks great and is very secure. I would buy another.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Bad ass rail! February 8, 2016
Reviewer: Jason Greenberg from Clearwater, FL United States  
The rail was delivered pretty quickly. The installation instructions are ok, but would be better if they were in color and with the corresponding weapon. I would also add that if you have fixed front sights on your Mossberg 930 spx, you will not be able to install the rail unless you remove the magazine tube and reinstall it after the rail is in place. That step is a pain in the butt when you have to keep pressure on the spring and tighten the magazine tube with very little space after the rail is installed. But it is worth it 10 fold! I love it.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Mossberg 930 SPX Tactical Rail December 31, 2015
Reviewer: Garry from Canadian, OK United States  
I know my way around firearms...but I am no gunsmith...having said that, be prepared for some challenges when you put this rail on. One in particular would be getting the mag tube spring back in after the rail has been installed.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Nice product June 10, 2015
Reviewer: Brad Blair from Chino Hills, CA United States  
Good quality rail/about as expected for price. Jst be careful to only torque rear mount screws to 24 inch lbs max....or bolt will hang up and not cycle.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
TACTICAL RAIL April 10, 2015
Reviewer: HAROLD D GARY SR from auburn, ME United States  
BEST THING FOR THIS MOSSBERG  IF I HAD TWO I'D BUY ANOTHER

Was this review helpful to you?

View All Customer Reviews

Browse for more products in the same category as this item:

Gun Parts
Gun Parts > Rail Systems