|
|
|
|
|
|
|
|
|
|
|
|
|
Being prepared is not only important, but it's affordable. This is the spare hardware kit for the Black Aces Tactical Quad Rail system, for Mossberg models. Keep a set in your range bag for those "just-in-case" situations.
Manufactured by Black Aces Tactical. Proudly Made in America.
|
Extend the functionality and utility of your ATI Halo Heatshield with these modular 2-inch pieces of Picatinny Rail. Fits ATI's Standard and Deluxe Halo Heatshields.
|
Looking to mount or raise-up an optic, such as scope, holographic sight or red dot, on your Picatinny/Weaver-style rail systems? This elegant solution provides a solid 0.5" saddle height and is constructed from aluminum.
*Firearm not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With a capacity for 50 shells, compatible with both 12 or 20 gauge, this shotgun bandoleer is easily a must-have.
|
BACKORDERED Fits ATI’s Standard Halo Heatshield for Maverick 88, Mossberg 500/535/590/835, Remington 870 & Winchester 1200/1300 Shotguns.
|
Fits Any firearm with two sling swivel studs and features durable black nylon and a laser-etched sling swivel.
*Firearm not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Change forends with ease. Works with Remington 870, Mossberg 500A/C, Mossberg 835, FNH SLP and other popular models.
|
Keep an extra 6-rounds of 12ga shells handy with this easy-to-install, side saddle shell carrier for your Remington Model 870 shotgun. This kit includes the mounting hardware as well as the strong polymer shell carrier and black anodized aluminum mounting plate.
|
Keep an extra 6-rounds of 12ga shells handy with this easy-to-install, side saddle shell carrier for your Mossberg Model 500/590 shotgun. This kit includes the mounting hardware as well as the strong polymer shell carrier and black anodized aluminum mounting plate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The location of the safety button on the 500 is ideal, but the design leaves a lot to be desired. Fixing the safety is probably the most common repair on the 500 series. There are two reasons why you might have to fix the safety on a 500:
1. The safety button, which is plastic on some 500 models, broke.
2. The shotgun performed the Mossberg "disappearing safety button" trick. The safety button is held in place by a single short screw that goes through the safety button and threads into the top of the safety block inside the receiver. If this screw works loose, the safety button and some of its ancillary parts will go flying.
|
Now you can mount a flashlight to your shotgun or rifle's Picatinny/Weaver-style rail system with a quick-release lever. This flexible solution allows the light to easily flip to the side when necessary. Comes complete with plastic sleeve inserts to accomodate flashlight tube diameters of 27mm, 25.4mm, or 20mm!
*Firearm and flashlight not included.
|
This Five-Position Forend Pistol Grip is ideal for tactical shotgun and AR platforms. Fits standard Picatinny rail. Features a clever end-cap with conceals battery storage and mounting point for light/laser pressure pad controls. Simple side-on mounting deck makes for an easy installation.
*Firearm not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Change forends without having to worry about disassembling your receiver. ATI has developed the Mag Socket Wrenches, constructed of military-type III anodized, 6061 T6 aluminum, that allows for quick changes of any forend, including all ATI forends, for Mossberg and Winchester shotguns. Fits 12 Ga Mossberg 500/535/550/875 and Winchester 1200/1300 Shotguns.
*Firearm not included.
|
Add stability and versatility to your pump shotgun with this Made in USA forend pistol grip. Enjoy enhanced control over muzzle flip and recoil. Fits Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns.
|
A great addition to any tactical shotgun or AR-15, this front sight features a quick-release mount for Picatinny/Weaver-style rail systems. The innovative flip-up feature allows quick access to traditional sighting when necessary while also being able to easily knock down when using an optic. This sight is elevation adjustable and constructed from aluminum.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This heavy duty single-point sling adds functionality and convenience to most rifle and shotgun platforms. Features include an easily adjustable bungee sling and strong steel clip. The one-point sling attaches to the rifle at the rear of the receiver using special receiver end plates with either a slot or hole for mounting. The slot will work with the supplied sling strap directly without any connectors and the hole design is for use with the spring clip.
The advantage of a one-point sling is its flexibility in use. Being attached at only a single point makes it easier to switch between dominent and support shoulders quickly. The one-point sling is often an excellent choice when operating from within a vehicle or participating in competition.
|
This heavy duty single-point sling adds functionality and convenience to most rifle and shotgun platforms. Features include an easily adjustable bungee sling and strong steel clip. The one-point sling attaches to the rifle at the rear of the receiver using special receiver end plates with either a slot or hole for mounting. The slot will work with the supplied sling strap directly without any connectors and the hole design is for use with the spring clip.
The advantage of a one-point sling is its flexibility in use. Being attached at only a single point makes it easier to switch between dominent and support shoulders quickly. The one-point sling is often an excellent choice when operating from within a vehicle or participating in competition.
|
This Universal Featherweight Bipod from ATI fits any firearm with a sling swivel stud and AR-15 types. Features a push “Snap-N-Lock” button to fold legs forward, rearward or downward. Note: Customer assembly required to determine Swivel or Non-Swivel Configuration or AR-15 Configuration.
*Firearm not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A great addition to any tactical shotgun or AR-15, this rear sight is compatible with Picatinny/Weaver-style rail systems. Features include a A2-style dual apertures with the larger Rapid Target Acquisition Aperture for CQB operations and the smaller Precision Aperture for high-accuracy aiming. This sight is both elevation and windage adjustable and is constructed from rugged steel and aluminum.
|
Upgrade your Mossberg 500 for tactical functionality. Featuring an integrated tri-rail system, you can add lights, lasers, and many other Weaver-/Picatinny-compatible accessories to your shotgun and no gunsmithing is necessary!
|
Upgrade your Remington 870 for tactical functionality. Featuring an integrated tri-rail system, you can add lights, lasers, and many other Weaver-/Picatinny-compatible accessories to your shotgun and no gunsmithing is necessary!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Expand your round capacity to 7-Shots with ATI’s Aluminum Mag Extensions for Remington 870 Shotgun. Fits 12 GA Remington 870 Shotguns.
*Firearm not included.
|
This Universal Bipod affixes to any rifle or shotgun with a Picatinny or Weaver-style rail system. Features adjustable, notched legs capable of 6- to 9-inches in overall height. Rubberized feet help maintain a secure footing and it's aluminum construction provides a lightweight yet solid platform.
*Firearm not included.
|
Expand your round capacity to 8-Shots with ATI’s Aluminum Mag Extensions for Remington 870 Shotgun. Fits 12 GA Remington 870 Shotguns.
*Firearm not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ATI is proud to introduce the Halo Heatshield. The Halo Heatshield is the industry’s first ever “Free Floating” Heatshield. The rear of the Heatshield is secured to the rear of the barrel with a DuPont® Extreme Temperature Polymer Clip while the front of the Heatshield is suspended above the shotgun barrel by two DuPont® Extreme Temperature Polymer V Blocks. Both the Rear Clip and Front V Blocks include an underlying High Temp Resistant Silicon pad that can withstand temperatures in excess of 600˚F.
|
ATI is proud to introduce the Halo Heatshield. The Halo Heatshield is the industry’s first ever “Free Floating” Heatshield. The rear of the Heatshield is secured to the rear of the barrel with a DuPont® Extreme Temperature Polymer Clip while the front of the Heatshield is suspended above the shotgun barrel by two DuPont® Extreme Temperature Polymer V Blocks. Both the Rear Clip and Front V Blocks include an underlying High Temp Resistant Silicon pad that can withstand temperatures in excess of 600˚F.
|
ATI is proud to introduce the Halo Heatshield. The Halo Heatshield is the industry’s first ever “Free Floating” Heatshield. The rear of the Heatshield is secured to the rear of the barrel with a DuPont® Extreme Temperature Polymer Clip while the front of the Heatshield is suspended above the shotgun barrel by two DuPont® Extreme Temperature Polymer V Blocks. Both the Rear Clip and Front V Blocks include an underlying High Temp Resistant Silicon pad that can withstand temperatures in excess of 600˚F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IN-STOCK!
Black Aces Tactical has just released their exclusive Side Shell Holder compatible with their Mossberg 500/590/590A1/Maverick 88 quad rail system! With a capacity of FIVE 12-gauge shells, you'll be ready to take your shotgun to the next level!
This shell holder features an ATI 5 shot grabber, a custom Black Aces Tactical back plate, and all the hardware needed to work with your quad rail.
|
Convert Your Mosin Nagant into a Modern Hunting Rifle! Fits Most 91/30 Rifles & M-38, M-44 Carbines and Mosin Nagant Variants 7.62x54R. Note: Some minor modification may be required.
*Firearm not included.
|
Ruger 10/22 Fiberforce Stock with classic lightweight Dragunov .22 design. For use with Open Sights or Scope. Fits Most Ruger 10/22.
Note: The Ruger 10/22 Fiberforce Stock will not accommodate rifles equipped with bull barrels.
*Firearm not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add 150-Lumen bright light to your shotgun or rifle's Picatinny/Weaver rail system. Crafted from lightweight aircraft-grade aluminum, this LED illumination system features a tail push-button momentary switch, end-cap twist-on switch, and includes a remote pressure switch for mounted use. Features also include a tactical crown/face and quick-lever mount release.
*Firearm not included.
|
Add fast target acquisition to your tactical shotgun or rifle with this crisp and vivid 4 MOA Target Red/Green Dot sight. Features include (5) brightness settings for diverse environmental backgrounds, unlimited eye relief, non-reflection high-tech emerald coatings, integrated quick-detach mount and flip-open lens caps. Also works with optional ½" mount riser to achieve co-witnessing with iron sights (Risers and Iron Sights Sold Separately).
|
Convert Your Mosin Nagant into a Modern Hunting Rifle! Fits Most 91/30 Rifles & M-38, M-44 Carbines and Mosin Nagant Variants 7.62x54R. Note: Some minor modification may be required.
*Firearm not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BACKORDEREDSix Position Adjustable Talon Tactical Shotgun Stock with Scorpion Recoil System, Triton Mount System and Adjustable Cheek-rest for most 12 Ga Maverick 88 And Mossberg 500/535/590/835 Shotguns.
*Firearm not included.
|
OUT-OF-STOCK Six Position Adjustable Talon Tactical Shotgun Stock with Scorpion Recoil System, Triton Mount System and Adjustable Cheek-rest for most 12 GA Remington 870 Shotguns.
*Firearm not included.
|
Turn your Surplus Mauser into a Scout Rifle! Fits Standard Bent Bolt, Large-Ring, German K-98’s, Czech VZ-24, Yugo 48/48a, Turkish 1903/1937/1938/1946 etc. 7mm or 8mm caliber.
Will not fit large-ring Swedish M38/96 6.5x55 or small ring Mausers. Must convert straight bolt or “wide arc” bolt Mausers to bent bolt with our Bolt Handle (#MBH1800) to use a standard scope.
Note: Hidden aluminum barrel clamps secure scope mount. Steel plate molded into nylon mount. Some minor modification may be required.
*Firearm not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BACKORDERED Six Position Adjustable Talon Tactical Shotgun Stock with Scorpion Recoil System, Triton Mount System and Adjustable Cheekrest for most 12 Ga Winchester 1200 & 1300 Shotguns!
*Firearm and accessories not included.
|
Convert your reliable Ruger 10/22 into the ultimate tactical .22! This non-adjustable, non-side folding Strikeforce Stock is ideal for those in states with restrictions on full-adjustable stocks. Features include the ATI Scorpion Razorback Recoil Pad and adjustable cheekrest. Fits Most Ruger 10/22. Six Degree Drop tube Adapter included for use with Iron Sights!
Note: The Ruger 10/22 Strikeforce Stock will not accommodate rifles equipped with bull barrels.
*Firearm and accessories not included.
|
Our COMBO Kit includes:
(1) Compact ITA Red/Green Target Dot Sight
(1) Tactical Flip-Up Front Sight
(1) Tactical Match-grade Detachable Rear Sight
(1) 0.5" High 3-Slot Low-Profile Compact Riser Mount
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
So far as we can tell, this is the first manufactured Mossberg 500/590/590A1 quad rail produced [and what a great piece]! This Mossberg rail is the last word in quality accessorizing.
Prepare to be blown away, because this is the real deal. This Mossberg 500/590/590A1-compatible rail is beautiful and entirely functional. This work of art now allows any picatinny rail accessory, such as those on your rifle, to be mounted on the Mossberg 500/590 -even the 590A1. Take your shotgun to the next level!
|
So far as we can tell, this is the first manufactured Mossberg 930 quad rail produced [and what a great piece]! This Mossberg rail is the last word in quality accessorizing.
Prepare to be blown away, because this is the real deal. This Mossberg 930-compatible rail is beautiful and entirely functional. This work of art now allows any picatinny rail accessory, such as those on your rifle, to be mounted on the Mossberg 930. Take your shotgun to the next level!
|
Now you can add functionality and tactical style to your Remington 870 and 1100 shotguns with ease. With this full-length rail system you can incorporate scopes, holographic sights, lights, lasers, Picatinny-mountable flip-up iron sights, and more. Thanks to the inclusion of quad rail mounting points, you can configure your rig however you would like. Milled from a solid piece of aluminum billet, this rail system is stiff while remaining light --adding just enough weight to your shotgun to help reduce felt recoil and muzzle flip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Long-distance or close-quarter battle, you'll be prepared with this state-of-the-art scope and green laser combo! Milled from a solid piece of aircraft grade aluminum, this unit has a Nitrogen charged fog-proof and shock-resistant housing built to withstand constant, heavy recoil. Notable features include dual-illuminated (Red, Green) reticles with adjustable rheostat for brightness control, angle cut sunshade to reduce glare, and a quick-release mount. Windage and elevation are adjustable and the scope features an integrated 5mW adjustable green laser.
|
Our Exclusive Kit Includes:
(1) Tactical Quad Rail
(1) Tactical Flip-Up Front Sight
(1) Tactical Match-grade Detachable Rear Sight
(1) Tactical Billet Safety
|
Our Exclusive Combo includes:
(1) Remington 870 and 1100 Tactical Rail
(1) Side Shell Holder
(1) UTG SWATFORCE 4.3" 150-Lumen Combat LED Weapon Light
(1) Tactical Flip-Up Front Sight for Picatinny/Weaver-style Rails
(1) Tactical Match-grade Detachable Rear Sight
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OUT-OF-STOCK
Illuminate the area around you with a tap of your fingertips. The Integrated Fore-end Light (IFL) affords the operator an incredible tactical advantage through the use of ambidextrous on/off pressure pads located on the fore-end. Settings include constant on, momentary, strobe and off. In high pressure situations you simply tap the pressure pads for activation, never adjusting your grip to do it. Your hand is always on the fore-end, at the ready, making this new integrated light ideal for Law Enforcement, Tactical Use or Home Defense.
These integrated lights feature a blinding 120 lumen output and will run on a single CR123 Lithium battery for at least 90 minutes. They are waterproof to 1-meter and feature a custom texture so you won't lose contact in high pressure situations.
Designed to fit the Mossberg 500/590 shotgun.
|
OUT-OF-STOCK
Illuminate the area around you with a tap of your fingertips. The Integrated Fore-end Light (IFL) affords the operator an incredible tactical advantage through the use of ambidextrous on/off pressure pads located on the fore-end. Settings include constant on, momentary, strobe and off. In high pressure situations you simply tap the pressure pads for activation, never adjusting your grip to do it. Your hand is always on the fore-end, at the ready, making this new integrated light ideal for Law Enforcement, Tactical Use or Home Defense.
These integrated lights feature a blinding 120 lumen output and will run on a single CR123 Lithium battery for at least 90 minutes. They are waterproof to 1-meter and feature a custom texture so you won't lose contact in high pressure situations.
Designed to fit the Remington 870 shotgun.
|
Our Exclusive MEGA COMBO Kit Includes (for Mossberg 12ga 500/590/590A1/Maverick 88):
(1) Tactical Quad Rail
(1) Tactical Flip-Up Front Sight
(1) Tactical Match-grade Detachable Rear Sight
(1) Tactical Billet Safety
(1) ATI Talon Tactical Six Position Adjustable Shotgun Stock
(1) Gun Cleaning Mat
(1) Disassembly & Reassembly Guide
(1) Digital Camo Safety Shooting Glasses
(1) Protective Glasses Pouch - Nocturnal
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Model 512 is the most popular model HWS. This tactical optic is perfect for agencies that want the best in CQB speed and versatility, without the need for night vision compatibility. The EOTech HWS is commonly used [and loved] by Military and Law Enforcement.
|
The Model 517 is designed to easily accommodate many firearms and operates on cost-effective “AA” batteries The Model 517 is both durable and submersible up to 10 ft and features side-mounted buttons, making this a perfect match for an EOTech G33 STS magnifier. This new button position also allows the user to operate the HWS function switches easier than ever before. Additionally, a portion of the front base has been raised to allow the sight to fit over standard hand guards found on many M-4 or M-16 style weapons
|
Shortest model sight yet! This sight is smaller and lighter than the other HWS sights and runs on a single 123 battery. With the new single battery configuration, the XPS allows more rail space than ever, leaving more room for rear iron sights, magnifiers or NV mount. Smaller, lighter and always fast; the XPS series is a great compact option for your platform.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offering true 2 eyes-open-shooting, a transversely mounted lithium 123 battery, and 7 mm raised base offering iron sight access, the new EXPS2 features easy to adjust side buttons and an adjustable, locking, quick detach lever for easy attachment and removal. The EOTech HWS is commonly used [and loved] by Military and Law Enforcement.
This sight is smaller than the former N-cell battery sight (511/551) and runs on single 123 battery. It also has a longer battery life than the N-cell style sights. Smaller, lighter and always fast. With the single battery configuration, the EXPS allows more rail space than ever, leaving more room for rear iron sights or NV mount.
|
The new G33 magnifier is shorter and lighter than the G23. It offers a new and improved mount providing faster transitioning from 3x to 1x, tool free azimuth adjustment, larger field of view and an adjustable diopter for improved, more precise focusing. This new G33 is an affordable magnified solution that will transition a fielded HWS into a lethal medium range optic. Superior light transmission and a large field of view helps this magnifier put the competition to shame. This rugged, streamlined optic offers split-second transitioning from CQB to medium range targeting.
|
Built to rugged military specs, and used by USSOCOM, the MRDS was designed to aid rapid target acquisition at close combat distances. Its small footprint, low power consumption, and auto/manual dot intensity adjustment with four brightness levels provide high visibility in all lighting conditions. It also features ease of operation over its competitors with capabilities such as a top-loading battery compartment that allows change-out without the need for sight removal or loss of zero. The positive click adjusters provide 1 MOA per click windage and elevation correction, ensuring quick and accurate sight alignment without the guesswork.
*Firearm not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
Regardless of the scenario this HHS provides an unparalleled advantage when transitioning from short to long range shooting. The EXPS2-2 offers true 2 eyes open shooting, a transversly mounted lithium 123 battery, 7 mm raised base offering iron sight access, and easy to adjust side buttons. The G33 3x magnifier with switch to side mount provides superior light transmission and the large field of view puts the competition to shame. Both units offer an adjustable, locking, quick detach lever for easy attachment and removal.
|
|
|
